Live earthquake map
Every earthquake of magnitude 2.5 or larger recorded worldwide by the US Geological Survey in the past week, on a globe you can turn, with the newest events pulsing.
Open the earthquake mapIn the live map, open Layers and switch on Earthquakes under Observations and live events.

What the map shows
The earthquake overlay reads the USGS real-time feed of earthquakes of magnitude 2.5 and above from the past seven days, refreshed every five minutes. Each event is drawn as a ring whose size grows with magnitude and whose colour shows its age: red for the last 24 hours, orange for one to three days, yellow for older events. Recent earthquakes “breathe” with a soft pulse, so a new event stands out at a glance; the animation stops when your system asks for reduced motion. Events with a USGS tsunami flag are marked in cyan.
Tap an earthquake for its magnitude, location, time, depth and, where available, the USGS PAGER alert level, which estimates likely fatalities and economic losses from the shaking. The link goes to the full USGS event page with the ShakeMap and felt reports.
Reading the pattern
Turn the globe and the plate boundaries draw themselves: the Pacific “Ring of Fire” from New Zealand through Indonesia, Japan, the Aleutians and down the Americas; the Alpine–Himalayan belt from the Mediterranean to Myanmar; and the quieter lines of the mid-ocean ridges. Deep earthquakes, hundreds of kilometres down, trace slabs of ocean floor sinking beneath Japan, Tonga and South America — the depth is in each event’s details.
Magnitude in brief
- 2.5–3.9: often felt nearby, rarely damaging.
- 4–5.9: felt widely; damage possible to weak buildings near the epicentre.
- 6–6.9: can be destructive in populated areas.
- 7 and above: major earthquakes, about 15 a year worldwide.
Magnitude is logarithmic: each whole step releases about 32 times more energy. Damage depends as much on depth, distance, local ground and building quality as on magnitude.
More hazards on the same globe
The same Layers menu adds GDACS global disaster alerts, US volcanoes at elevated alert levels, NASA EONET natural events and tropical cyclones from the US National Hurricane Center. For rain-triggered slope failures after a quake, see the landslide risk map.
Frequently asked questions
Where does the earthquake data come from?
From the US Geological Survey’s real-time earthquake feeds, which combine the global seismic network with regional networks. USGS data are in the US public domain.
How quickly do new earthquakes appear?
USGS usually publishes an event within minutes, and the map refreshes the feed every five minutes. Magnitudes and locations are often revised in the first hour.
Why are small earthquakes missing in some regions?
The feed lists magnitude 2.5 and above. Outside the United States, small events may not be detected or may only be listed by national agencies.
Does the map warn about tsunamis?
No. It shows the USGS tsunami flag as information only. Tsunami warnings come from official tsunami warning centres and local authorities.